Home :: Products Map

Products Map

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z #


Manual for stove
Parts manuals for our current Gas and Wood Stoves can be downloaded from our main site at this address: http://www.woodstove.com/support

Price: $5.00
Quantity
Masonry Adapter
The Masonry Adapter is designed to pass through an existing masonry thimble and leave a trimmed and ready connection for double wall/close clearance pipe on the room side.

Price: $51.00
Quantity
Masonry Chimney Conversion Kit
Use this kit when you will be venting your gas stove into a standing masonry chimney. Includes adapters for both bottom and top of chimney to maintain separation between air intake and exhaust.

Price: $193.00
Quantity
MB 6" Adjustable Roof Flashing (12/12 24/12)
Seals penetration where pipe passes through roof. Use in conjunction with Storm Collar (Part #6T-SC) to seal between flashing and vent pipe. For steep roof pitches from 12/12 to 24/12.

Price: $215.00
Quantity
MB 6" Adjustable Roof Flashing (2/12 6/12)
Seals penetration where pipe passes through roof. Use in conjunction with Storm Collar (Part 6T-SC) to seal between flashing and vent pipe. For roof pitches from 2/12 to 6/12. Flashings for steeper pitched roofs are available.

Price: $82.00
Quantity
MB 6" Adjustable Roof Flashing (24/12 36/12)
Seals penetration where pipe passes through roof. Use in conjunction with Storm Collar (Part 6T-SC) to seal between flashing and vent pipe. For roof pitches from 24/12 to 36/12. Other flashings are available for other roof pitches.

Price: $307.00
Quantity
MB 6" Adjustable Roof Flashing (6/12 12/12)
Seals penetration where pipe passes through roof. Use in conjunction with Storm Collar (Part 6T-SC) to seal between flashing and vent pipe. For roof pitches from 6/12 to 12/12. Other flashings are available for other roof pitches.

Price: $107.00
Quantity
MB 6" Attic Insulation Shield
Required as fire protection in ceiling cavities by preventing insulation from coming in contact with chimney pipe. Normally used in conjunction with a Finish Ceiling Support or Firestop.

Price: $81.00
Quantity
MB 6" Cathedral Adapter for T-MH (2/12 4/12)
Often required when installing Class A chimney in mobile home construction.

Price: $81.00
Quantity
MB 6" Finish Support Package
Used as chimney support for installations where stove is located in a room with a flat ceiling. Provides transition from single wall (or close clearance) stove pipe to stainless steel chimney pipe. Support Kit can be painted to match stove and stove pipe. Also available with round trim plate (Part #6T-FSP-R)

Price: $105.00
Quantity
MB 6" Finishing Collar
Finishing collar provides trim at connection between stove pipe and stainless steel pipe in installations where stainless steel pipe is visible in the living space. Painted to match stove and stove pipe color.

Price: $20.00
Quantity
MB 6" Firestop/Joist Shield
Provides required clearances for chimney pipe in multi-story installations and prevents spread of fire between stories. Required at each ceiling except where Finish Ceiling Support Kit is used at first floot level. Not required where pipe passes through roof.

Price: $31.00
Quantity
MB 6" Insulated Tee w/Cap
Used mostly in "through-the-wall" installations, the Insulated Tee is combined with the Wall Support Kit (Part #6T-WSK) to start a chimney up the exterior wall of the building or through a vertical interior or exterior chase. A removable cap is included for easy cleanout.

Price: $265.00
Quantity
MB 6" Insulated Wall Thimble
Used to safely pass stainless steel pipe through combustible walls. Provides required 2" clearance for pipe and radiation shield protects wall. Round shield can be painted to match stove and stove pipe if other than black.

Price: $81.00
Quantity
MB 6" Interior Resupport
The Interior Resupport is required to support the chimney pipe in a diagonal pipe run in the building. Collar is tightened around the pipe and attached to framing.

Price: $69.00
Quantity
MB 6" Mobile Home Joist Shield (Flat)
Used to provide required clearance from joists and insulation in mobile home installations.

Price: $117.00
Quantity
MB 6" Pitched Ceiling Plate (2/12-6/12)
This trim piece provides a finished look around the stainess steel pipe on a pitched ceiling. For ceilings with pitches from 2/12 to 6/12.

Price: $41.00
Quantity
MB 6" Pitched Ceiling Plate (6/12-12/12)
This trim piece provides a finished look around the stainess steel pipe on a pitched ceiling. For ceilings with pitches from 6/12 to 12/12.

Price: $41.00
Quantity
MB 6" Roof Support Package
Supports chimney in Cathedral Ceiling installations where customer prefers not to use the Support Box. Roof Support Package contains 18" length of stainless steel pipe with roof brackets and hardware. Used in conjunction with Pitched Ceiling Plate to trim opening in ceiling.

Price: $176.00
Quantity
MB 6" Round Top
A round chimney cap tops off your installation to keep out rain, snow, leaves, and birds. Has lower skirt to deflect wind.

Price: $90.00
Quantity
MB 6" Spark Arrestor
Stainless steel wire mesh screen attaches to Round Top Chimney Cap to prevent sparks from traveling up and out of chimney. Required in Mobile Home installations.

Price: $23.00
Quantity
MB 6" Storm Collar
Storm Collar slips around chimney pipe just above roof flashing to keep out rain and snow. Attaches with tab and slot system.

Price: $15.00
Quantity
MB 6" Support Box
The Support Box is used to provide required clearances and support for stainless steel chimney in cathedral ceilings or mobile home installations. It includes a trim collar to cover cut-out in finshed ceiling. Can be painted to match stove and stovepipe if other than black.

Price: $156.00
Quantity
MB 6" Trim Plate Spacer
Can be used to trim flat ceiling or soffit penetrations at pass through for chimney pipe in multi-story installations. Used in conjunction with Firestop/Joist Shield.

Price: $44.00
Quantity
MB 6" Wall Band
Used to support vertical runs of chimney along the wall and maintain 2" clearance.

Price: $35.00
Quantity