Home :: Gas Stove Direct Vent Kits :: All Gas Vent Components

All Gas Vent Components

These are all of the direct vent gas components available. As always, if you have questions about installing one of our stoves, please just call us toll free: 1-800-866-4344.

Products

Sort by: Product Price Default
  •  per page
3"x4" Chimney Liner Termination Kit
Used to terminate 3" and 4" flex pipe used in Fireplace Installations where the chimney is between 16' and 24' tall.

Price: $130.00
Quantity Temporarily Out of stock
3"x4" Co-Axial to Co-Linear Appliance Connector
Used in Fireplace Installation #4B to connect 3" and 4" flex pipe at chimney top. Used with Part #924WCL, which provides the connection at the stove.

Price: $120.00
Quantity Temporarily Out of stock
Attic Insulation Shield
The Attic Insulation Shield provides a barrier between direct vent gas pipe and insulation materials above a flat ceiling.

Price: $67.00
Quantity
Cathedral Ceiling Support Box
Provides proper clearances as well as support for vent pipe where it passes through cathedral ceiling. Includes trim for finished appearance in the room.

Price: $75.00
Quantity
Wall Thimble
Wall thimble provides pass through of vent pipe through exterior wall. Maintains proper clearances for pipe and serves as firestop.

Price: $38.00
Quantity
Adjustable Roof Flashing (0/12-6/12)
Seals penetration where pipe passes through roof. Use in conjunction with Storm Collar (Part #953) to seal between flashing and vent pipe. For roof pitches from 0/12 to 6/12. Use Steep Roof Flashing for pitches from 7/12 to 12/12.

Price: $27.00
Quantity
Steep Roof Flashing
Seals penetration where pipe passes through roof. Use in conjunction with Storm Collar (Part #953) to seal between flashing and vent pipe. For roof pitches from 7/12 to 12/12. Use Steep Roof Flashing for pitches from 7/12 to 12/12

Price: $51.00
Quantity
Dead Soft Adjustable Flashing 0/12-6/12
Dead Soft Flashing is extremely maleable and can be bent by hand to match the contour of a metal, tile, or other uneven roof surface.

Price: $51.00
Quantity
Dead Soft Flashing 7/12-12/12
Dead Soft Flashing is extremely maleable and can be bent by hand to match the contour of a metal, tile, or other uneven roof surface.

Price: $74.00
Quantity
Chimney Conversion Kit A
For use when you are replacing a woodstove and using a pre-fab metal chimney to vent your gas stove. Provides necessary adapters to maintain separation between intake air and exhaust at stove and at chimney top. See details to choose which kit you need.

Price: $206.00
Quantity
Chimney Conversion Kit B
For use when you are replacing a woodstove and using a pre-fab metal chimney to vent your gas stove. Provides necessary adapters to maintain separation between intake air and exhaust at stove and at chimney top. See details to choose which kit you need.

Price: $206.00
Quantity
Chimney Conversion Kit C
For use when you are replacing a woodstove and using a pre-fab metal chimney to vent your gas stove. Provides necessary adapters to maintain separation between intake air and exhaust at stove and at chimney top. See details to choose which kit you need.


Price: $206.00
Quantity
Ceiling Firestop
Required for vertical installations at second floor and every subsequent floor for fire safety.

Price: $10.00
Quantity
Direct Vent Chimney Liner Termination Kit
Used in Fireplace Installation #4A to connect 3" flex pipes at chimney top.

Price: $130.00
Quantity
High Wind Termination Cap
Recommended to top off vent pipe in all vertical installations. Prevents wiind gusts from extinguishing flame or pilot in stove.

Price: $63.00
Quantity
Extended Vertical Termination Cap
This chimney cap is recommended for extremely cold climates or where in proximity to other flues.

Price: $134.00
Quantity
Horizontal Square High Wind Termination Cap
For through-the-wall horizontal installations in high wind conditions, this piece caps off the vent pipe installation on the exterior wall and maintains separation between intake air and exhaust. Helps prevent wind gusts from extinguishing pilot and flame in the stove.

Price: $155.00
Quantity
Masonry Chimney Conversion Kit
Use this kit when you will be venting your gas stove into a standing masonry chimney. Includes adapters for both bottom and top of chimney to maintain separation between air intake and exhaust.

Price: $193.00
Quantity
Round Ceiling Support/Wall Thimble Cover
This trim plate is used to trim the hole in horizontal through-the wall installations or flat ceiling vertical installations.

Price: $49.00
Quantity
Standard Co-Axial to Co-Linear Appliance Connector
Used in Fireplace Installation #4A to connect two 3" flex pipes to the stove for intake and exhaust. Used with Part #923GK, which terminates the connection at the chimney top.

Price: $120.00
Quantity
Storm Collar
Fits around vent pipe above roof flashing to prevent water leakage.

Price: $8.00
Quantity
Vinyl Siding Standoff
Used as a heat shield for Horizontal Vent Caps that are installed on vinyl siding.

Price: $50.00
Quantity
Wall Strap
Used for supporting vertical runs of vent pipe.

Price: $17.00
Quantity
Elbow Strap
Use for better support between offsets.

Price: $12.00
Quantity
Restrictor Disk
Used to restrict incoming air flow in Direct Vent pipe in high draft installations.

Price: $4.00
Quantity
  •  per page