Home :: Gas Stove Direct Vent Kits :: Installation 3: Straight Up

Installation 3: Straight Up

Click here to view Detailed Drawing
Select Quantity and then use Button at bottom to add items to cart

The Fireside Franklin and Cottage Franklin gas stoves can handle a vent pipe that rises up to a maximum of 24' in height. This option is a good alternative when it is not possible to terminate the vent pipe by going through an outside wall. The vent pipe in the room with the stove can be black. Above the ceiling and/or roof, it must be galvanized to protect from rust or corrosion. Unlike woodstove chimneys, this direct vent pipe only extends above the roof 12-48" depending on roof pitch. Included in the list of components below is support for a flat ceiling as well as support for a pitched or cathedral ceiling. You will need to determine the amount of pipe based on the height of the ceiling, attic space, and roof pitch.

Products

Sort by: Product Price Default
  •  per page
90 Black Swivel Elbow
Black direct vent pipe for use in the room with your gas burning stove. Black elbows available in either 45 or 90 degrees. When combining lengths, remember to subtract 2" from each to account for overlap. Direct vent pipe should not be cut. Use adjustable sections to allow for length adjustment.

Price: $58.00
Quantity
6" Black Pipe
Black direct vent pipe for use in the room with your gas burning stove. When combining lengths, remember to subtract 2" from each to account for overlap. Direct vent pipe should not be cut. Use adjustable sections to allow for length adjustment.


Price: $38.00
Quantity
9" Galvanized Pipe
Galvanized pipe for use in concealed spaces and outdoors. When combining lengths, remember to subtract 2" from each to account for overlap. Direct vent pipe should not be cut. Use adjustable sections to allow for length adjustment.

Price: $24.00
Quantity
9" Black Pipe
Black direct vent pipe for use in the room with your gas burning stove. When combining lengths, remember to subtract 2" from each to account for overlap. Direct vent pipe should not be cut. Use adjustable sections to allow for length adjustment.

Price: $37.00
Quantity
12" Black Pipe
Black direct vent pipe for use in the room with your gas burning stove. When combining lengths, remember to subtract 2" from each to account for overlap. Direct vent pipe should not be cut. Use adjustable sections to allow for length adjustment..

Price: $41.00
Quantity
18" Black Pipe
Black direct vent pipe for use in the room with your gas burning stove. When combining lengths, remember to subtract 2" from each to account for overlap. Direct vent pipe should not be cut. Use adjustable sections to allow for length adjustment.

Price: $47.00
Quantity
24" Black Pipe
Black direct vent pipe for use in the room with your gas burning stove. When combining lengths, remember to subtract 2" from each to account for overlap. Direct vent pipe should not be cut. Use adjustable sections to allow for length adjustment

Price: $53.00
Quantity
36" Black Pipe
Black direct vent pipe for use in the room with your gas burning stove. When combining lengths, remember to subtract 2" from each to account for overlap. Direct vent pipe should not be cut. Use adjustable sections to allow for length adjustment

Price: $65.00
Quantity
48" Black Pipe
Black direct vent pipe for use in the room with your gas burning stove. When combining lengths, remember to subtract 2" from each to account for overlap. Direct vent pipe should not be cut. Use adjustable sections to allow for length adjustment.

Price: $78.00
Quantity
8 1/2" Pipe Extension, Black
The Pipe Extension enables you to adjust the total length of a straight pipe. One end of the pipe extension slides inside another straight pipe length as little as 2" or as much as 6". This adjustability is very helpful in most installations. Black direct vent pipe for use in the room with your gas burning stove.

Price: $32.00
Quantity
16" Pipe Extension, Black
The Pipe Extension enables you to adjust the total length of a straight pipe. One end of the pipe extension slides inside another straight pipe length as little as 2" or as much as 6". This adjustability is very helpful in most installations. Black direct vent pipe for use in the room with your gas burning stove.

Price: $37.00
Quantity
Round Ceiling Support/Wall Thimble Cover
This trim plate is used to trim the hole in horizontal through-the wall installations or flat ceiling vertical installations.

Price: $49.00
Quantity
Cathedral Ceiling Support Box
Provides proper clearances as well as support for vent pipe where it passes through cathedral ceiling. Includes trim for finished appearance in the room.

Price: $75.00
Quantity
Attic Insulation Shield
The Attic Insulation Shield provides a barrier between direct vent gas pipe and insulation materials above a flat ceiling.

Price: $67.00
Quantity
Adjustable Roof Flashing (0/12-6/12)
Seals penetration where pipe passes through roof. Use in conjunction with Storm Collar (Part #953) to seal between flashing and vent pipe. For roof pitches from 0/12 to 6/12. Use Steep Roof Flashing for pitches from 7/12 to 12/12.

Price: $27.00
Quantity
Steep Roof Flashing
Seals penetration where pipe passes through roof. Use in conjunction with Storm Collar (Part #953) to seal between flashing and vent pipe. For roof pitches from 7/12 to 12/12. Use Steep Roof Flashing for pitches from 7/12 to 12/12

Price: $51.00
Quantity
Dead Soft Adjustable Flashing 0/12-6/12
Dead Soft Flashing is extremely maleable and can be bent by hand to match the contour of a metal, tile, or other uneven roof surface.

Price: $51.00
Quantity
Dead Soft Flashing 7/12-12/12
Dead Soft Flashing is extremely maleable and can be bent by hand to match the contour of a metal, tile, or other uneven roof surface.

Price: $74.00
Quantity
Storm Collar
Fits around vent pipe above roof flashing to prevent water leakage.

Price: $8.00
Quantity
High Wind Termination Cap
Recommended to top off vent pipe in all vertical installations. Prevents wiind gusts from extinguishing flame or pilot in stove.

Price: $63.00
Quantity
Extended Vertical Termination Cap
This chimney cap is recommended for extremely cold climates or where in proximity to other flues.

Price: $134.00
Quantity
6" Galvanized Pipe
Galvanized pipe for use in concealed spaces and outdoors. When combining lengths, remember to subtract 2" from each to account for overlap. Direct vent pipe should not be cut. Use adjustable sections to allow for length adjustment.

Price: $22.00
Quantity
12" Galvanized Pipe
Galvanized pipe for use in concealed spaces and outdoors. When combining lengths, remember to subtract 2" from each to account for overlap. Direct vent pipe should not be cut. Use adjustable sections to allow for length adjustment.

Price: $28.00
Quantity
18" Galvanized Pipe
Galvanized pipe for use in concealed spaces and outdoors. When combining lengths, remember to subtract 2" from each to account for overlap. Direct vent pipe should not be cut. Use adjustable sections to allow for length adjustment.

Price: $33.00
Quantity
24" Galvanized Pipe
Galvanized pipe for use in concealed spaces and outdoors. When combining lengths, remember to subtract 2" from each to account for overlap. Direct vent pipe should not be cut. Use adjustable sections to allow for length adjustment.

Price: $38.00
Quantity
  •  per page